Solace Zone IVC Heated 32-Cage P.I. Mobile Unit
The Solace Zone Heated IVC 32 Cage P.I. Mobile Unit uses technology to provide heated and HEPA filtered ventilated air to transport and/or temporarily house mice away from the primary animal housing area.
This mobile unit creates a thermal neutral zone within the cages, helping to alleviate cold stress in your rodents and creating a warm, comforting environment for post-surgery recovery.
The cart is constructed of high quality 304 stainless steel. It features a removable top shelf that doubles as a work surface. This mobile unit has 5″ casters, 2 with brakes. The entire unit and cages are autoclavable with the exception of the air handling unit and power channels.
Use the air handling unit (AHU) to control the temperature within the cages. Unit can be set to 45, 60 or 80 air changes per hour (AC/H) to each cage. It also features two on-board battery setting – a transport mode and emergency mode where the battery lasts up to 24 hours.
The Solace Zone heated IVC P.I. mobile unit holds up to 32 Gentle-Air style cages with 16 cages per side.
- Creates a thermal neutral zone within the cages
- Help alleviate cold stress in your rodent research models
- Provides heated area and HEPA filtered ventilated air
- Unit holds up to 32 Gentle-Air style cages with 16 cages per side
- Control the temperature within the cages through the air handling unit
Part # – GA-PI-32-M-UD-WB-HEAT
Dimensions – 47”L x 33”D x 41 3/4″H
IMPORTANT: INITIAL CLEANING
All components of the Alternative Design stainless steel product must be cleaned, sanitized and sterilized, where applicable, prior to being put into service. This unit is made primarily of 304 stainless steel. Use care when cleaning to prevent corrosion that can shorten useful life. Cleaning solutions which contain high levels of chlorine are not recommended for stainless steel parts.
Caster used on this equipment was chosen for its suitability in applications where frequent washdowns are necessary. It is also well suited for applications exposed to heat, cleaning agents, steam, caustic solutions or other corrosive agents, which could cause rust and contamination. After washing and/or autoclaving, check casters for proper operation. Check the axle nut to ensure it is still tight (125 inch/pound is recommended). If the axle and/or swivel bearing has to be lubricated, use a high temp grease.
Alternative Design offers a 5-year warranty on all stainless steel fabricated products the company makes. These products are warranted to be free from material and workmanship defects during this period.
The 5-year warranty includes:
* Individually Ventilated Caging (IVC) rack frames and fabricated components
* All other stainless steel fabricated caging systems
* Fabricated material handling, storage and processing equipment made of stainless steel